Friendly, Reliable and Independent Your local Sunshine Coast Specialist for all your Foam, Latex, Rubber, Upholstery and Matting needs   Rubber Sheeting Extrusions 10-12 Glen Kyle Dr Maroochydore Q 4558 Ph 07 5479 2944 Fx 07 5479 0208 Hours Mon-Fri 8.30am-5 pm Sat 8.30am - 11.30am Closed Sun & Public Holidays Introduction Open Cell Foam Bedding  Matting Marine Rubber Sheeting & Extrusions Adhesives Closed Cell Foam & Polystyrene Sheeting Request a Quote     Rubber extrusions and sponge sections Description: a huge range of shapes and sizes including square and circular extrusions, bulb seals, pinch weld, channelling and others Uses: various Thickness: various Width: various     Automotive & Industrial INSERTION RUBBER. Description: Natural rubber with one or two reinforcing plies. Uses: Ideal for mudflaps, mountings etc. where high tear strength is required. Thickness:1.5mm and 3mm(single ply), 4.5mm and 6mm(double ply) Width: 50, 75,100, 150 & 300mm wide up to 10metre lengths. Thickness: 3mm(single ply), 4.5mm and 6mm(double ply) Width: 1200mm wide off the roll to 10metre lengths. Neoprene Rubber Sheeting. Description: Tough, Durable semi elastic material. Uses: Various applications Thickness: 1.5mm, 3mm and 4.5mm Width: 1200mm wide off the roll. Nitrile Butadiene Sheeting. Similar to Neoprene Sheeting, but with oil resistant properties. Ribbed Rubber. Description: continuous rubber sheeting with fine or broad ribs. Uses: Commonly used in utes and tray backs to protect the tray and prevent rattling and sliding of Toolboxes Etc. Thickness: 3.5mm and 5mm. Width: 1500mm, 1830mm(standard tray width) and 2000mm.             Introduction | Open Cell Foam | Bedding | Matting | Marine | Rubber Sheeting & Extrusions | Adhesives| Closed Cell Foam & Polystyrene Sheeting |  Request a Quote |   Copyright© 2009 Foam & Rubber Industries. All rights reserved.